.jpg)
CJS Technology
(JM0525300-U)
12, Jalan Hang Tuah 8,
Taman Koperasi Muhibbah,
86000 Kluang,
Johor, Malaysia.
+6016-7228975Branch
22, Jalan Permai Jaya 3,
Taman Permai, Kg Tengah,
85000 Segamat,
Johor, Malaysia.
+6012-7425833China Service Officer
for GuangZhou, ShenZhen
GST No.:
000915939328
Motorised Lock
| Previous | 2 / 12 | Next |
Download Files
Motorise_lock.jpg (482.82 KB)Motorise_lock.jpg (482.82 KB)
Motorise_lock.pdf (180.22 KB)
Widely used on exit door or external gates, equally equipped to lock heavy duty doors, cages, wooden exit door
etc and lock come with a circular key clinder with 3 keys which will fit door/gate thickness of 40~90mm.
The Motorised lock is supplied without manual override, the units are non-handed suitable for left or right side
opening.
Nylon gears ensure a smooth, silent and rust-free operation, while the varnish coating on the electronics ensure
Nylon gears ensure a smooth, silent and rust-free operation, while the varnish coating on the electronics ensure
the suitability for external use.
An audible signal is generated if there is a locking error, a sensor between the lock and the keeper provides the
alignment trigger to automatically drive the deadbolt.
This surface mount lock has been designed with fixings which are compatible with other locking devices of a
similar nature, so retrofit/replacement is easier.Widely used on exit door or external gates, equally equipped to lock heavy duty doors, cages, wooden exit door
etc and lock come with a circular key clinder with 3 keys which will fit door/gate thickness of 40~90mm.
The Motorised lock is supplied without manual override, the units are non-handed suitable for left or right side
opening.
Nylon gears ensure a smooth, silent and rust-free operation, while the varnish coating on the electronics ensure
Nylon gears ensure a smooth, silent and rust-free operation, while the varnish coating on the electronics ensure
the suitability for external use.
An audible signal is generated if there is a locking error, a sensor between the lock and the keeper provides the
alignment trigger to automatically drive the deadbolt.
This surface mount lock has been designed with fixings which are compatible with other locking devices of a
similar nature, so retrofit/replacement is easier.